NDT equipment - Eddy Current for Maintenance

    Omni 200

    The Omni 200 is a Multi Channel Eddy Current Acquisition System, with an unique software tool for complete control of tubing inspections. Auto analysis of data is an optional software module providing you fast and accurate analysis.

              

    Specifications of the OMNI-200

    • Power: 100-250 VAC 50/60 Hz
    • Environmental: 32 – 113°F (0 to 45°C) operating range,
      -4 - 158°F (-20 to 70°C) storage
    • Interface: Four port 10/100 Ethernet switch
    • Frequency Range: 20 Hz to 5 MHz
      ET: 100Hz – 5Mhz
      RFT: 20Hz – 100Khz
    • Drive Voltage:
      ET: 0 – 20 Vpp
      RFT: 0 – 60 Vpp 300 ma protected
    • DC Output: 0-10 Volt 1.5 Amp protected
      RPC Motor Output: 0-10 Volt 1.5 Amp protected
    • System Gain: -22 to 20 db adjustable
      Preamp Gain: 0-700 adjustable
    • Frequency Generators: 4 multiplexed or simultaneous
      Channel Capacity:
      Simultaneous mode 32
      Multiplexed mode 128
      Context mode 512
    • Impedance Matching: Eliminates need for Hardware Null
    • Auto Reference: Eliminates need for separate absolute probe
    • Sample Rate:
      Samples/Second mode 100 to 10000 s/s
      Samples/Distance mode English or Metric selectable
    • Status and Diagnostic: Voltage and Temperature monitoring
      (software) Application specific LED lights
    • Software Controlled Power Disable.

    Supported probes: with AM-201 module

    (4 impedance coils and 4 driver/pickup coils)

    • Bobbin Probes
    • RFT probes (up to four coils)
    • Array probes (up to four coils)
    • Includes one channel of reference probe removal

    Supported probes: with AM-202 module

    (8 impedance coils)

    • SG Array Technologies
    • Array probes (up to eight coils)
    • Dual Bobbin Inspection
    • Includes two channels of reference probe removal

    Standard system contents

    • OMNI-200 with either AM-201 or AM-202 probe module
    • Power Cord
    • Operating Guide with Certificate of Calibration
    • Shipping Case
     

    Omni 200 is manufactured by:

    Stacks Image 2618
     

    Contact Servicing Europe NDT bv for more information.

     

    Trackdrive 200

    Eddy current instrument and track drive (Probe pusher) in one instrument! Connects to a laptop computer via Ethernet.A Probe Pusher designed to meet all your tube examination requirements – Low speed for rotating probe applications, high speed for bobbin & array probe applications, and superior torque across the speed range.

              

    Features of the Trackdrive-200

    • One Package
      The entire pusher system, including the controller electronics is contained in a single unit.
    • Low Maintenance
      The servo-motor eliminates the need for a transmission. The gearbox and bearings are sealed
    • Enhanced Traction & Torque
      Eight inches of contact from the drive belt delivers more than enough push/pull power.
     

    Trackdrive 200 is manufactured by:

    Stacks Image 2618
     

    Contact Servicing Europe NDT bv for more information.

     

     

    Vantage

    The Vantage is ETher NDE’s first hand-held and fully featured Eddy Current Flaw Detector, which allows true single hand operation, leaving the operator free to use their other hand to scan with a probe. The Vantage specification and features are comprehensive and will appeal to users in Aerospace, Offshore oil, Petrochemical, Power Generation and Rail/ Axle Inspection industries. With a full colour display and a compact and robust enclosure, the Vantage is ideal for use in all on-site and factory environment.

              

    Features of the Vantage

    • Perfectly balanced for comfortable single-handed operation.
    • Lightweight 0.8kg (1.8lbs) with rugged housing.
    • Automatic lift-off setting.
    • Separate connector for Absolute and Reflection / Bridge Probes.
    • 3.5” easy to read, bright, high-resolution (115 DPI / 0.22mm pixel) display.
    • PC-based analysis and reporting utility software for easy analysis and reporting included with the Instrument..
     

    Vantage is manufactured by:

    Stacks Image 2618
     

    Contact Servicing Europe NDT bv for more information.

     

    Olympus NORTEC 500

    The Nortec 500 Series eddy current flaw detectors incorporate a full range of features:internal balance coils, VGA output connector (for heads up displays, monitors,and projectors), and a USB interface for rapid information transfer. The Nortec 500also includes PowerLink, for automatic probe recognition and program set-up.

              

    Key features of the NORTEC 500

    • 50 Hz to 12 MHz frequency range
    • preamplifier (0 or 14 dB)
    • Single Li-Ion battery, choice of two battery configurations: 2.4 Ahr or 8.8 Ahr
    • Lightweight, 1.2 kg to 1.7 kg (2.8 lbs to 3.8 lbs) depending on battery configuration
    • 165 mm (6.5 in.) full VGA color LCD (640 x 480 resolution)
    • On-board storage of up to 200 programs
    • On-screen reference memory for go/no go applications
    • Internal balance loads for single coil probe support
    • Display Freeze to hold flaw signals
    • PowerLink technology - automatic probe recognition and instrument set-up
    • Foreign Object Debris (FOD) free case design
    • VGA output.

     

    Features - general

    • Dimensions
      (W x H x D)216 mm x 140 mm x 61 mm (8.5 in. x 5.5 in. x 2.4 in
    • Weight
      1.2 kg to 1.7 kg (2.8 lbs to 3.8 lbs), depending upon configuration
    • Display
      133 mm x 99 mm, 165 mm diagonal (5.25 in. x 3.9 in., 6.5 in.) full VGA color LCD (640 x 480 pixels)
    • Operating temperature
      –10 ºC to 55 ºC (14 ºF to 122 ºF)
    • Humidity
      5% to 95%
    • Classification
      Based on Class 2 specifications from the MIL-PRF-28800F handbook
    • Altitude
      Maximum operating and non-operating altitude - 4600 m (15,000 ft)
    • Hazardous area operation
      Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Association Code (NFPA 70), Section 500, and tested using MIL-STD-810F, Method 511.4, Procedure 1
    • Probe types
      Absolute and differential in either bridge or reflection configuration. The instrument is fully compatible with Nortec PowerLink probes.
    • Alarms
      Can be set to trigger on positive or negative box, polar, or sweep alarm settings
    • Alarm modes
      1 to 3 box gates, polar, sweep, conductivity, and coating thickness
    • Trace storage
      Up to 200 traces can be stored for recall. The traces can be static or frozen and can contain up to 60 seconds of movement. The traces are stored with the date and time of capture.
    • Program storage
      Up to 200 instrument set-ups may be stored and recalled. The date and time of storage is recorded with each set-up.
    • Print out
      Provides a custom configurable report header containing the display screen data and probe parameters including serial numbers (PowerLink probes only)

     

    MEASUREMENT

    • Frequency range
      50 Hz to 12 MHz
    • Gain
      0 dB to 90 dB in 0.1 dB steps. The horizontal and vertical gains may be adjusted separately or together.
    • Rotation
      Variable 0º to 359º in 1º steps
    • Sweep
      Variable from 0.005 s to 4 s per division
    • Low Pass filter
      10 Hz to 500 Hz and wide band
    • High Pass filter
      Off or 2.0 Hz to 500 Hz, 2 pole response
    • Built-in preamplifier
      5X (14 dB) additional gain.
    • Probe drive
      2 volts, 6 volts, 12 volts
    • Variable persistence
      0.1 s to 5 s

     

    INPUTS/OUTPUTS

    • Power
      2-pin connector to charge the internal batteries and operate the instrument from AC power
    • USB port
      Allows interface with PC and printers
    • Probe connector
      16-pin LEMO and BNC
    • Analog outputs
      Horizontal and vertical outputs of both F1 and F2. +/– 5 V, 1 V per division (four outputs)
    • Alarm outputs
      15-pin analog and alarm output connector
    • VGA output
      15-pin connector

     

    POWER

    • Power requirements
      85 V to 240 V, 50 Hz to 60 Hz. Battery can be
      charged within the instrument or in an external charger. Charge typically takes 4 hours.
    • Available batteries
      2.4 Ahr Li-ion or 8.8 Ahr Li-ion
    • Low battery protection
      Display bar graph “gas gauge” indicates approximate operating time. A low battery annunciator indicates when approximately 10 minutes of operation time is left.
    • Battery operating time
      3 to 8 hours nominal depending on configuration and scanner usage

     

    CONDUCTIVITY

    (Nortec 500C, 500S and 500D only)

    • Frequency
      60 kHz or 480 kHz
    • Digital conductivity specification
      Digital conductivity display from 0.9% to 110% IACS or 0.5 to 64 MS/m. Accuracy within +/– 0.5% IACS from 0.9% to 65% IACS and within +/– 1.0% of values over 62%. Meets or exceeds BAC 5651 specifications.
    • Non-conductive coating thickness
      Can measure non-conductive coating thickness from 0 mm to 0.38 mm (0 in. to 0.015 in.). Accuracy of 0.025 mm (+/– 0.001 in.) over 0 mm to 0.38 mm (0.00 in. to 0.015 in.) range

     

    SCANNERS

    (Nortec 500S and 500D only)

    • Scanner compatibility
      Will operate all current Nortec scanners and many other commercially available scanners
    • Waterfall display
      60 sweeps per hole and includes an on screen readout of the distance to the defect from the start of the scan

     

    DUAL FREQUENCY

    (Nortec 500D only)

    • Frequency extension
      50 Hz to 12 MHz
    • Second frequency
      25 Hz to 6 MHz, 2nd frequency is an exact division of the first frequency
    • Display
      Frequency 1 (F1) only, frequency 2 (F2) only, sum of F1 and F2, difference between F1 and F2, split screen with selected combinations of F1 and F2 and mixed frequencies
    • High Pass filter
      Available in frequency (F1) only.
     

    NORTEC 500 is manufactured by:

    Stacks Image 2618
     

     

    Download de brochure (pdf file).

     

    Contact Servicing Europe NDT bv for more information.

     

     

    Olympus NORTEC 2000

    The Nortec 500 Series eddy current flaw detectors incorporate a full range of features:internal balance coils, VGA output connector (for heads up displays, monitors,and projectors), and a USB interface for rapid information transfer. The Nortec 500also includes PowerLink, for automatic probe recognition and program set-up.

              

    Features of the NORTEC2000

    • Dimensions
      9.5" L x 5.5" W x 3.6" D(241mm x 140mm x 92mm)
    • Weight
      2000D: 6 lbs. (2.7Kg) with batteries installed.
      2000D+: 4.6 lbs (2.09Kg) with battery installed.
      3.6 lbs. (1.6Kg) without batteries.
    • Display(EL)
      EL (electroluminescent), 4.7" x 3.5"(5.7" diagonal) (120mm x 90mm [145mm diagonal])
      active display area. 320 H x 240 V pixel display resolution. 72Hz refresh rate.
    • Display(LCD)
      Monochrome LCD (liquid crystal dis-play), 3.0" x 3.8" (4.8" diagonal)(76mm x 96mm [122mm diagonal]),320 H x 240 V pixel. 72Hz refresh rate. Backlight is adjustable for different viewing conditions.
    • Display(Color LCD)
      Available as option for 2000D+models. Color LCD (liquid crystal display), 3.0" x 3.8" (4.8" diagonal),(76mm x 96mm [122mm diagonal]) 320 H x 240 V pixel. 72Hz refresh rate. Backlight is adjustable for different viewing conditions.
    • OperatingTemp
      -4° to 140° F (-20° to 60° C)
    • StorageTemp
      -40° to +176°F (-40° to +80°C)
    • Power DC
      Two 10.8V DR35 NiMH batteries(2000D) One 10.8V Li-Ion battery(2000D+), optional “D” cell belt pack,or optional external DR35 pack.
    • Power AC
      External charger/adapter. Will fully charge batteries in approximately 6hours and operate the instrument simultaneously. Line voltage 100 to240VAC,47-63Hz.
    • Low Battery
      Front panel display, a warning message indicates less than ½ hour operating time remaining.
    • Operating Time
      8 hours typical at 75°F (24°C) withEL display. 7 hours typical with LCD display. Estimated operating time remaining is indicated by an icon on the status display. With optional belt mounted battery pack, 8 hours typical.
    • Humidity
      MIL-STD-28800 — Safe operation in exposure to Class 3 temperature/humidity environment (-10°C to 55°Cat 95% ±5% relative humidity non-condensing).
    • Altitude(Max.Operating)
      15,000 ft. (4,572 m) above sea level.
    • Altitude(Max. Non-operating)
      40,000 ft. (12,192 m) above sea level.
    • Hazardous Area Operation
      Safe operation in explosive atmosphere as defined by Class 1, Divi-sion 2, Group D, as found in the National Fire Protection AssociationCode 70 (NFPA 70), Section 500 and tested using MIL-STD-810E, Method511.3, Procedure 1.
     

    NORTEC 2000 is manufactured by:

    Stacks Image 2618
     

     

    Contact Servicing Europe NDT bv for more information.

     

     

    Stacks Image 397

    Servicing Europe NDT bv


    P.O. Box 49
    4700 AA Roosendaal
    The Netherlands
    Email: sales@sendt.com
    Servicing Europe NDT bv
    Scherpdeel 30
    4703 RJ Roosendaal

    The Netherlands
    Tel. +31 (0)165 538 606
    Servicing Europe NDT bv
    Tel. +31 (0)165 538 606
    Email: sales@sendt.com
    Stacks Image 5849
    Stacks Image 5857