MPI Benches  

Servicing Europe NDT provides the following MPI Bench series:
MAGAZON EBU Series, for large components
MAGAZON SBU series, for small components
MAGAZON PBU Series, portable

Related products:

    

   
MAGAZON EBU Series

Back to top

    
Designed for testing medium to large components, the MAGAZON EBU series of MPI benches is able to provide substantial magnetizing currents where needed.
The series comprises various bench sizes, a wide range of magnetizing modes and current waveforms,
and a variety of accessories and ancillary equipment.
  • All MAGAZON EBU series benches control the current using the CPS method (Current Pre-Selection). This allows the operator to select a given current and the bench will automatically achieve this value during the magnetizing shot.
     
    

   
 
  • A built-in memory can store up to 99 sets of data, including test parameters for each component. This is useful where test batches are small and frequent changes are needed.
  • Multi-directional magnetizing, or Swinging Field, allows two magnetizing circuits to operate simultaneously, eliminating the need for multiple shots. Defects in any orientation can be highlighted, with only one viewing operation needed.
  • Automatic Sequencing provides a degree of automation, which can be selected depending on the application. The sequence controls the clamping, inking, magnetizing and unclamping automatically.
  • MAG-Link provides control of the bench via a PC.

    For more information please contact us.

 

    
   
MAGAZON SBU series

Back to top

    
The MAGAZON SBU series of MPI benches is designed to test small components, which can be easily handled, and need only modest magnetizing currents. Various bench sizes are available, a wide range of magnetizing modes and current waveforms, and a variety of accessories and ancillary equipment. Baugh & Weedon NDT prides itself on its flexibility to build equipment to individual specifications, should the standard range not suffice.
 		    

   
 

A nominal 2500A power pack provides AC, with HWDC and single-phase FWDC waveforms as options.
All MAGAZON SBU series benches control the current using the CPS method (Current Pre-Selection). This allows the operator to select a given current and the bench will automatically achieve this value during the magnetizing shot.

For more information please contact us.

 

    
   
MAGZON PBU series (portable)

Back to top

    
The MAGAZON PBU 500 is a small MPI bench with an integral ink tank, a bed length of 500mm, and a separate power pack. Primarily designed for the inspection of small components, such as pins and bolts, the construction of the unit allows it to be transported easily. It is equally well suited for use in a fixed location or, as a portable unit, on various sites and workplaces.
 		    

   
 

The PBU 500 operates on a 230V and/or 115V AC, 50Hz, 13Amp supply. The unit utilizes spring-loaded clamping.

For more information please contact us.