Industrial Eddy Current Probes  
       
Weldscan Probes Tubing Probes    
Encircling Probes      
       
   
Weldscan Probes Back to top    

SPTECH has a broad line of weld scan probes available for both above and underwater applications:

Design: Straight, 90 deg inline or right angle
Diameters: 9.5 mm (small), 16 mm (medium), 32 mm (large)
With connector or fixed cable upto 50m
Frequencies: 100, 200, 100-600 kHz
Stainless steel and ceramic tips on request

Applications:
- Ferrous steel welds (100 kHz)
- Stainless Steel and Aluminium welds (100-600 kHz)
 


 

   

The weldscan probes are manufactured by:

   
     
   
Tubing Probes Back to top    
A large variety of tubing probe designs are available:
 		    
  • Bobbin probes
    - removable heads and shafts
    - barnacle scraper probe and poly shaft
    - magnetic saturation barnacle scraper probe
    - U-bend flex probe
  • RFT probes
    - remote field boiler probe
    - dual exciter remote field heat exchanger probes
    - single exciter remote field heat exchanger probes
    
Manufactured (by CoreStar) using special cable and connector design, makes these probes almost unbreakable.
 		    

   
     
   
Encircling Probes Back to top    

  • Various sensitivities available

  • With or without absolute channel for longitudinal crack detection

  • Test piece diameters: 0.1–227 mm
    (1/8 – 8 7/8 inches)

  • Special designs available for unusual profiles

 
 		    
PRÜFTECHNIK offers encircling coils for full-body eddy current inspection. The coils are available with all types of windings, in several housing sizes, and test piece diameters. All encircling coils are optionally available with the patented SMART SENSOR chip for storing information on sensor type, size, serial number, and sensing width. The SMART SENSOR chip can be used with the EDDYCHECK 5 series.
 		    

The encirling probes are manufactured by:

    
     
     

 

For more information, contact
Servicing Europe NDT