Eddy Current Instruments  
       
EDDYCHECK 5 (multi channel, in-line inspections) EDDYSENSOR (special ET Tasks)    
Omni 200 (multi channel, tubing, RFT) Trackdrive 200 (multi channel, tubing, RFT)    
Rotating System RS65 (in-line inspections, longitudinal defects) Novaflux (Flux Leakage, bar testing)    
       
   
EDDYCHECK 5 Advanced Back to top    

The EDDYCHECK5 Advanced is an Eddy Current Instruments for in-and off line production control and quality testing.
 

    


 

The trendsetter in eddy current testing

  • Fast, state-of-the-art computer-based system

  • All major applications requiring 1 or 2 test coils or rotating system

  • Extremely simple operation featuring touch screen monitor

  • Extensive signal evaluation options

  • Complete documentation of test results and statistics

  • Connection to host computer or central controlling network

    

The EDDYCHECK 5 is manufactured by Prüftechnik

    
   
EDDYSENSOR Back to top    

Special sensor for basic detection problems. Process control at a reasonable price.

  • Specialized on simple testing problems requiring a single sensor

  • Delayed signal output capabilities

  • Clear bar graph display of signal

    


 

EDDYSENSOR is a very basic eddy current sensor that steps in when other sensors such as proximity switches and light barriers fail to do the job.
To mention just a few applications:

  • When annealing, EDDYSENSOR detects cracks in material entering an annealing unit to prevent unwanted gas flow

  • In mantling processes, it detects the joints connecting the individual tubes under the mantling for cutting

  • In strip galvanizing, it locates the butt welds linking the sheet metal strips

    

The EDDYSENSOR is manufactured by Prüftechnik

    
     
     
   
Omni 200 Back to top    

The Omni 200 is a Multi Channel Eddy Current Acquisition System, with an unique software tool for complete control of tubing inspections. Auto analysis of data is an optional software module providing you fast and accurate analysis.
 

    
           

   

OMNI-200 System Specifications
Power: 100-250 VAC 50/60 Hz
Environmental: 32 – 113°F (0 to 45°C) operating range,
                      -4 - 158°F (-20 to 70°C) storage
Interface: Four port 10/100 Ethernet switch

OMNI – 200 Acquisition System
Frequency Range: 20 Hz to 5 MHz
     ET: 100Hz – 5Mhz
     RFT: 20Hz – 100Khz
Drive Voltage:
     ET: 0 – 20 Vpp
     RFT: 0 – 60 Vpp 300 ma protected
DC Output: 0-10 Volt 1.5 Amp protected
RPC Motor Output: 0-10 Volt 1.5 Amp protected
System Gain: -22 to 20 db adjustable
Preamp Gain: 0-700 adjustable
Frequency Generators: 4 multiplexed or simultaneous
Channel Capacity: Simultaneous mode 32
Multiplexed mode 128
Context mode 512

 

Supported Probes:
With AM-201 Module
(4 impedance coils and 4 driver/pickup coils)

-  Bobbin Probes
-  RFT probes (up to four coils)
-  Array probes (up to four coils)
-  Includes one channel of reference probe removal

With AM-202 Module
(8 impendence coils)

-  SG Array Technologies
-  Array probes (up to eight coils)
-  Dual Bobbin Inspection
-  Includes two channels of reference probe removal

Impedance Matching: Eliminates need for Hardware Null
Auto Reference: Eliminates need for separate absolute probe
Sample Rate: Samples/Second mode 100 to 10000 s/s
                    Samples/Distance mode English or
                     Metric selectable
Status and Diagnostic: Voltage and Temperature monitoring
                                (software)
                                 Application specific LED lights
Software Controlled Power Disable

Standard System Contents
 OMNI-200 with either AM-201 or AM-202 probe module
Power Cord
Operating Guide
Certificate of Calibration
Shipping Case
 

    
The Omni 200 is manufactured by CoreStar
    
   
Trackdrive 200 Back to top    
Eddy current instrument and track drive  (Probe pusher) in one instrument!
Connects to a laptop computer via Ethernet.
A Probe Pusher designed to meet all your tube examination requirements – Low speed for rotating probe applications, high speed for bobbin & array probe applications, and superior torque across the speed range.		    

OnP

One Package: The entire pusher system, including the controller electronics is contained in a single unit

 Low Maintenance: The servo-motor eliminates the need for a transmission.  The gearbox and bearings are sealed

 Enhanced Traction & Torque: Eight inches of contact from the drive belt delivers more than enough push/pull power

 

 

The Trackdrive 200 is manufactured by CoreStar

 		    
   
Rotating System RS65 Back to top    

 

    


 

Testing for longitudinal defects

  • For identification of longitudinal defects

  • Diameter range: 5–65 mm (3/16–2½ in)

  • Lift-off compensation system for optimum signal-to-defect correlation

  • Extremely robust design

    

The Rotating System RS65 is manufactured by Prüftechnik

    
   
Novaflux Flux Leakage Systems Back to top    

 

    


 

Ultra-sensitive bar testing system

  • High speed testing

  • Cost-saving

  • Cost-effective

  • User-friendly

  • Documented test results

  • Compatibility

    

The Novaflux Flux Leakage systems are manufactured by Prüftechnik

    
     
     
     

 

For more information, contact
Servicing Europe NDT